Optional Chip Extractor available

Knife & Accessories Catalogue (Adobe PDF)

The controls on this edger are positioned at the proper height for the operator and alignment is easy with the digital sawblade alignment controls and laser markers. The twin laser markers help the operator identify proper positioning of the planks to be edged. Variable speed feeding allows the operator to maximize production at the proper speed for the material being edged.

Twin Blade Edger Features:

• Two 14″ carbide-tipped saw blades
• Will handle up to 12 1/2″ boards
• Hydraulic Variable Speed Feeding forward and reverse
• 25 HP gas motor or optional diesel
• Optional trailer package
• One movable saw one fixed saw
• Simple measuring device
• 6ft in feed and out feed tables
• Weighs 900 pounds

The controls on this edger are positioned at the proper height for the operator and alignment is easy with the digital sawblade alignment controls and laser markers. The twin laser markers help the operator identify proper positioning of the planks to be edged. Variable speed feeding allows the operator to maximize production at the proper speed for the material being edged.

Twin Blade Edger Features:

• Two 14″ carbide-tipped saw blades
• Twin Lasers for quick board positioning
• Digital controls for sawblade positioning
• Will handle up to 12 1/2″ boards
• Variable Speed Feeding
• 20 HP 3-phase electric motor
• 4″ Saw Dust Exhaust Outlet

Extensive use in Papua New Guinea shows the EcoMill is the only truly hand portable sawmill that can be consistently hand carried from log to log within the forest or jungle without difficulty. Less portable sawmills lead to clear felling as they cannot be carried with the ease of the EcoMill.

The EcoMill can also be used in a stationary position and logs simply rolled or loaded under the rails one after the other. There is no need to move the end frames or dismantle any part of the sawmill to do this. Simply wind up the saw ready for the next log. There is no frame on the ground that will be distorted by the log or require removal to load the next log.

The EcoMill is a low cost investment specifically designed for small operators. It can be easily transported by utility or trailer, and can be carried to the log, reducing environmental damage.

The EcoMill Professional Sawmill includes as standard: 18hp engine; all safety features; heavy duty end frames and rails; a comprehensive User Manual; and basic tools and spares.

Key Benefits

Only the EcoMill can be termed a true ecological sawmill because it can be carried with ease and set up on all types of terrain. The EcoMill is the only true all-terrain portable sawmill on the market.

The EcoMill is capable of a production rate of 1m3/hour of sawn timber using around 20 litres of fuel a day. The ability to select a cut to follow taper, dodge faults and avoid imperfections is unique to the EcoMill.

The EcoMill is arguably the safest portable circular sawmill in the world.
The three unique features of the EcoMill that make it so different to other portable sawmills are: 180° blade swing; parallelogram frame; and independent leg levelling, allowing unmatched speed of set up and versatility when cutting with the EcoMill.
Accurate cuts can be made with a deviation of ± 1mm with the capacity to cut boards from 5mm x 5mm up to 200mm x 400mm.

How it Works

A circular saw blade is used to make a horizontal cut along the log followed by a vertical cut coming back in the opposite direction. The saw blade is swung by a hand lever into a horizontal or vertical position at either end of the log. The timber is cut to size as you proceed through the log. .

The EcoMill offers the only truly independent horizontal and vertical end frame adjustment without the need to re-establish or reposition the frames. This allows the saw to be aligned with the log from the first cut, or at any stage in the cutting process, thereby providing maximum recovery. The ability to select a cut to follow the taper, dodge faults, avoid imperfections and choose your best and longest grains is unique to the EcoMill.

No major on-site preparation is required as the EcoMill comes with four adjustable screw out feet that allow levelling of the sawmill in under one minute. Being a portable mill, we realised the huge benefit of not having large bars to level on uneven ground. Our independent leg wind down system can be parallel in less than a minute.

The EcoMill Professional Sawmill is an all-terrain hand-portable sawmill designed to cut logs where they fall.

Extensive use in Papua New Guinea shows the EcoMill is the only truly hand portable sawmill that can be consistently hand carried from log to log within the forest or jungle without difficulty. Less portable sawmills lead to clear felling as they cannot be carried with the ease of the EcoMill.

The EcoMill can also be used in a stationary position and logs simply rolled or loaded under the rails one after the other. There is no need to move the end frames or dismantle any part of the sawmill to do this. Simply wind up the saw ready for the next log. There is no frame on the ground that will be distorted by the log or require removal to load the next log.

The EcoMill is a low cost investment specifically designed for small operators. It can be easily transported by utility or trailer, and can be carried to the log, reducing environmental damage.

The EcoMill Professional Sawmill includes as standard: 18hp engine; all safety features; heavy duty end frames and rails; a comprehensive User Manual; and basic tools and spares.

Key Benefits

Only the EcoMill can be termed a true ecological sawmill because it can be carried with ease and set up on all types of terrain. The EcoMill is the only true all-terrain portable sawmill on the market.

The EcoMill is capable of a production rate of 1m3/hour of sawn timber using around 20 litres of fuel a day. The ability to select a cut to follow taper, dodge faults and avoid imperfections is unique to the EcoMill.

The EcoMill is arguably the safest portable circular sawmill in the world.
The three unique features of the EcoMill that make it so different to other portable sawmills are: 180° blade swing; parallelogram frame; and independent leg levelling, allowing unmatched speed of set up and versatility when cutting with the EcoMill.
Accurate cuts can be made with a deviation of ± 1mm with the capacity to cut boards from 5mm x 5mm up to 200mm x 400mm.

How it Works

A circular saw blade is used to make a horizontal cut along the log followed by a vertical cut coming back in the opposite direction. The saw blade is swung by a hand lever into a horizontal or vertical position at either end of the log. The timber is cut to size as you proceed through the log. .

The EcoMill offers the only truly independent horizontal and vertical end frame adjustment without the need to re-establish or reposition the frames. This allows the saw to be aligned with the log from the first cut, or at any stage in the cutting process, thereby providing maximum recovery. The ability to select a cut to follow the taper, dodge faults, avoid imperfections and choose your best and longest grains is unique to the EcoMill.

No major on-site preparation is required as the EcoMill comes with four adjustable screw out feet that allow levelling of the sawmill in under one minute. Being a portable mill, we realised the huge benefit of not having large bars to level on uneven ground. Our independent leg wind down system can be parallel in less than a minute.

With the sliding reach to get the log moving, the skid master had no problem skidding the logs. The moving reach has been installed with rubber shock absorbers to take the load when using this option. The skid master comes with 12″ 6 ply tires and flotation tires are also available as a option. We also build these in larger scale models.

To compliment the ATV Skid Master, we also build a logging trailer with loading arm and tongues with a standard 1200lbs hand winch. The winching system is available in 12volt electric as an option.