Used Logging Equipment and Mills

For Sale: – 8×16 Pro Mill (27 HP gas engine w/8 ” cut)
3 years old, 72 hours on mill, 2 softwood blades need to be re-tipped, hardwood blade still brand-new, it comes with a custom log-dog table, for cutting small logs (VERY handy). Shipping would be f.o.b. Perth, Ontario. Asking $12000.00. Contact Lindsay at (250)396-4607.

Testimonials for the used logging equipment listed below:

“I have operated equipment for Joe Monette for approximately 8 years. During that time I’ve had the opportunity to operate all of Joe’s equipment. I can honestly say that all of his equipment is well maintained. Joe takes pride in having clean, well maintained machines. In the time that I work for Monettle logging I never once
saw a machine repaired in a make shift manor.

Being a helicopter pilot I have come to expect equipment to run well and not break down. When I run Joe’s equipment I don’t need to worry about working on it. Every break up the machine is cleaned thoroughly, and all “snags” addressed. In the bush any potential break downs or wore parts were also addressed before a major break
down would occur.

If you have any questions regarding Joe’s equipment you can contact me at 250-395-0802.”

- Sincerely, Frank Walcher, Equipment operator, Helicopter pilot

“I have operated heavy duty and forestry equipment of all make and models for 15 + years, more than 30,000 hrs . I have yet to work for a company with such a great maintenance schedule and machines in such tip top condition as the machines shown here. I have personally sat in the seat of most of these machines and they are all in excellent condition well maintained.” – Lindsay Flett

For Sale: -2004 475B Trans Gesco Feller Buncher C/W quadco 24″ 360 rotation V-1 head, Leveling cab,Espor Heater,auto lubrication system, fire suppression, 5025 hrs In Excellent shape ready to go to work. Well maintained. High Production unit. Contact joe@hardwoodsinternational.com.

For Sale: -2003 Trans Gesco 475A C/W 5660 quadco feller buncher processor head with high speed intermitent saw,Espal Heater, auto Lube, Fire suppression, 10 meter boom, 4000 hrs In excellent condition. Well maintianed. High production machine. Contact joe@hardwoodsinternational.com.

For Sale: -1995 Hitachi Ex300 Buttom top, rear entry cab, Weldco beales grapp; New Isuzu Engine, New rotech bearing, hydraulics pumps , Undercarriag have been done with in the last 3000 hrs Hrs on machine 17700 hrs in great condition ready to go to work today. Contact joe@hardwoodsinternational.com.

For Sale: -1997 timberjack 933D Clambunk C/W 36″ metal Marquis Tracks, spare tire, Short log Bunk attachment installed, 2750 hrs. In excellent conditions ready to go work. Contact joe@hardwoodsinternational.com.

For Sale: -1994 250 ELC Komatsu excavator , forestry Guarding, 42″ Dig bucket, 60″ clean up bucket, Hydraulic thumb, Jewels power clam, 60″ (brush lobe; this may need to be changed) high lift kit. Ready to go to work. HRS 12125. Contact joe@hardwoodsinternational.com.

For Sale: -1986 dresser TD 20G , enclosed cab, forestry Guarding, Ateco ripper, tree tow AALH grapple, Calco 80 winch, 76″Extreme service shoes, this macine is very good condition. Ready to go to work. Contact joe@hardwoodsinternational.com.

For Sale: -1995 John Deere 748E Grapple Skidder, Enclosed cab, A/C, rear tires 75% Good chains, Front tires 15% Chains are used , Hrs are 18000 hrs. ready to go to work In good condition. Contact joe@hardwoodsinternational.com.

For Sale: -1977 International 24ft Insulatd van, Power tail gate, hobart welder, air compressor,Aero Quip Hydraulic Hose press with hose and fittings. Contact joe@hardwoodsinternational.com.

For Sale: -1995 Timberjack 2628 c/w 20″ koering waterous feller buncher head, with side tilt,leveling cab, Under carriage is good. Ready to go to work. Contact joe@hardwoodsinternational.com.

For Sale: -1994 John Deere 748E Grapple Skidder, Enclosed cab, A/C, rear tires 75% Good chains, Front tires 20% Chains are used , Hrs are 18400 hrs. ready to go to work In good condition. Contact joe@hardwoodsinternational.com.

For Sale: -1998 PC 300-6 Excavator C/W Forestry Guarding, 16” cab riser, 2 buckets, power clam, high lift kit on lift cyclinder, weldco power clam, under carriage fair. Ready to go to work. 10500. Contact joe@hardwoodsinternational.com.

For Sale: -2007 Komatsu PC 200-7 Processor ,c/w weldco forestry cab, guarding, High and Wide, waratah 622B , High lift kit, transferable warranty to 6000 hrs. Current hour meter 2500 hrs. Contact joe@hardwoodsinternational.com.

For Sale: -Meereen Johnson web saw palletizing line, Comes with 3 scissor lifts, complete 40 hp power packs, full hydraulic package, complete transfer chain line, 2 push button stations, everything inclusive, 6 yrs old, current replacement value @ $ 90,000.00. Contact Lindsay at (250)396-4607.

For Sale: - Budgit 1 Tonne Gib Crane, complete with 360 degree turning pedestal, chain, hoist, hand held controls, 12 years old, current Replacement value, $ 10,000.00. Auto Lathe Plastic strapping machine, 120v comes with auto feed bed system, foot pedal operation, 3 full boxes of ¾” strapping, 4 yrs old, current replacement value @ $9,000.00. Current replacement value for all @ $ 169,000.00,. Will sell everything complete for $ 40,000.00. Contact Lindsay at (250)396-4607.

For Sale: – Merren Johnson MJ 352 Web saw, Comes with the following, #435 11 web saw, with 10 saws, complete wood slat flat bed feed System, 6 yrs old, current replacement value @ $60,000.00. Contact Lindsay at (250)396-4607.

For Sale: – HP99 band saw full set computer set works 20′6′cut board drag
back return, trailer package, log turners, log clamps, taper attachments. 2 – 30″ mills ……… each $29,900.00, 1 – 36″ mill ……… each $32,000.00. CAD funds. Contact Lindsay at (250)396-4607.

For Sale: – The DL 11 band resaw computer set works 12×12 capacity 3 phase
$11,000.00. CAD funds. Contact Lindsay at (250)396-4607.

For Sale: – DL 400 band resaw 10×16 model, computer set works, self contained
$16,000.00. CAD funds. Contact Lindsay at (250)396-4607.

For Sale: – DL 12 Manual Band Re saw, new Asking $6,995.00. CAD funds.
Contact Lindsay at (250)396-4607.

For Sale: – DLM 410 3 phase 4 head plane moldier. Asking $8,995.00 plus freight. CAD funds.
Contact Lindsay at (250)396-4607.

For Sale: – Duncan Beam Mill – Electric. Live Log deck, Transfer deck, Green chain, Saw dust conveyor. All in good working condition. Contact Lindsay at (250)396-4607.

Used Mill for Sale, Contact # BOB @ 604-486-7009